What the Elvie Stride 2 Connect Kit Includes
The Elvie Stride 2 Connect Kit (Double) is an accessory designed exclusively for use with the Elvie Stride 2 breast pump. It enables suction to the cups, and the double kit gives you the flexibility to set up your pump for either single or double pumping. The kit contains the necessary tubing and connectors to link the pump motor to the collection cups, though the exact components are not listed in the supplied information—refer to the product packaging for a full inventory.
Kit Compatibility and Purpose
- Elvie Stride 2 Connect Kit (Double): These accessories are designed for exclusive use with Elvie Stride 2. Ensures you purchase the correct kit for your pump model; the kit will not work with other pumps.
Elvie Stride 2 Connect Kit (Double) - Elvie Stride 2 Connect Kit (Double): Use the Elvie Stride 2 Connect Kit to enable suction to the Cups. The kit is essential for creating the vacuum seal needed for effective milk expression.
- Elvie Stride 2 Connect Kit (Double): The Double kit can also be used to set up your pump for single or double pumping. Gives you the flexibility to pump from one or both breasts without needing a separate single kit.
How to Set Up the Elvie Stride 2 Connect Kit
Setting up the Connect Kit involves attaching the tubing to the pump motor and the collection cups. The following steps are based on the supplied compatibility and usage notes; for detailed operating instructions, refer to the manual included with your Elvie Stride 2.
- Check compatibility: Confirm you have an Elvie Stride 2 pump. The Connect Kit is not designed for other models.
- Attach tubing to pump: Connect one end of the tubing to the suction port on the Elvie Stride 2 motor unit. Push firmly until it clicks or seats securely.
- Connect tubing to cups: Attach the other end of the tubing to the connector on the collection cup. For double pumping, repeat this step for the second cup.
- Select single or double mode: The Double kit includes the parts needed for both configurations. If pumping from one breast, cap the unused port with the provided seal (if included).
- Test suction: Before pumping, turn on the pump and check that air is flowing through the tubing. If you hear a leak, check all connections.
Tips for a Smooth Setup
Because the Connect Kit is specific to the Elvie Stride 2, keep the original packaging to store spare parts. If you experience weak suction, inspect the tubing for kinks or damage—replacing the kit may resolve the issue. The supplied information does not include cleaning or replacement intervals, so follow the care instructions that came with your pump.


